CMI ALLOY FIGURE 8 DESCENDER W/ EARS Big enough to handle the largest ropes--two of them. Extended horns on the upper ring make tying off a snap by preventing the rope from sliding up and locking off. Dual holes on the tie-in end allow the 8-Ring to remain attached to the harness while... MSRP: Was: Now: $79.99 Add to Cart
NOTCH RC GRAPPLE Movement in the canopy made easy with this collapsible retrievable hook designed by Reg Coates. We partnered with Reg Coates to develop the RC Grapple- a device that allows you to get super mobile in the canopy. When attached to the tag end of... MSRP: Was: Now: $254.99 Add to Cart
PETZL CHICANE AUXILARY BRAKE Auxiliary brake for mechanical Prusik on single ropes, for tree care The CHICANE auxiliary braking device allows ZIGZAG and ZIGZAG PLUS mechanical Prusiks to be used on single ropes. It provides continuous additional friction on descents. The excellent... MSRP: Was: Now: $224.95 Add to Cart
PETZL PIRANA GUIDE Adjustable friction descender with spur and locking slot Stay in control during the entire descent! The PIRANA GUIDE is an adjustable friction descender. It has three rope installation options and allows you to adapt the degree of friction before... MSRP: Was: Now: $64.95 Add to Cart
PETZL PIRANA CLUB Adjustable friction descender It has three rope installation options and allows you to adapt the degree of friction before initiating a descent. It works well when used right-handed or left-handed. The plastic ring makes rope installation easier,... MSRP: Was: Now: $48.95 Add to Cart
WEST COAST CLIMBER FOOT LOOP West Coast Climber Foot Loop. Small- 5 inch foot width Large- 6 inch foot width * Boots Not Included MSRP: Was: Now: $30.00 Choose Options
ISC MINI ROPE GRAB 10.5MM-13MM This fixed-axle ropegrab is certified to EN353-2, making it ideal for use on lanyards. ISC Ropegrabs have a nonaggressive cam-face design which helps prevent rope wear. Technical Information Rope diameter range (mm)10.5 -... MSRP: Was: Now: $128.99 Add to Cart
ISC LARGE ROPE GRAB 14MM-16 MM This fixed-axle ropegrab is certified to EN567. ISC Ropegrabs have a nonaggressive cam-face design which helps prevent rope wear. Technical Information Rope diameter range (mm)14 - 16(MBS) Minimum Breaking Strength (kN)Dependant... MSRP: Was: Now: $136.99 Add to Cart
US STANDARD FLIPLINE ADJUSTER 1/2" TO 5/8" This is Wesspur's new version of the U.S. Standard Rope Grab from Climb Right mounts the tensioning spring inside the cam, so there is no external spring cable to snag or cut. Two versions available: one for 3/8” to 1/2” diameter fliplines,... MSRP: Was: Now: $80.95 Add to Cart
ROCKGRAB 90 ADJUSTER REPAIR KIT Rock exotica’s lanyard adjuster features a 90 degree twist in the cam lever so that the unit lies in a more easily accessible position. 1/2” capacity or 1/2” to 5/8” capacity. Ribbed cam. Weighs 5 oz for the smaller version, and 8... MSRP: Was: Now: $9.95 Add to Cart
US STANDARD FLIPLINE ADJUSTER (SMALL MICRO GRAB) 3/8"-1/2" U.S. Standard Rope Grab from Climb Right mounts the tensioning spring inside the cam, so there is no external spring cable to snag or cut. Two versions available: one for 3/8” to 1/2” diameter fliplines, one for 1/2” to 5/8”... MSRP: Was: Now: $80.95 Add to Cart
(REPAIR KIT ONLY) FOR GIBBS STEEL ASCENDER AND FLIPLINE ADJUSTER Gibbs Repair Kit for these ascenders that are highly respected in the climbing community for their strength and reliability. Easy to install on any flipline, and secures with a nylock nut. This ascender is a popular choice for those who want the strength... MSRP: Was: Now: $31.95 Add to Cart
GIBBS STEEL ASCENDER AND FLIPLINE ADJUSTER 5/8" TO 3/4" Gibbs ascenders are highly respected in the climbing community for their strength and reliability. Easy to install on any flipline, and secures with a nylock nut. This ascender is a popular choice for those who want the strength of steel. MSRP: Was: Now: $131.99 Add to Cart
US STANDARD FLIPLINE ADJUSTER REPAIR KIT Standard Rope Grab from Climb Right mounts the tensioning spring inside the cam, so there is no external spring cable to snag or cut. Two versions available: one for 3/8” to 1/2” diameter fliplines, one for 1/2” to 5/8” fliplines... MSRP: Was: Now: $8.10 Add to Cart
