phone: 250-585-1320
24 of 25 Items
  • ISC LARGE FULLY MARKED ALUM RING

    ISC LARGE FULLY MARKED ALUMINUM RING

    These quality aluminum rings from ISC are proof loaded to more than 16kN and are rated to 25kN. They feature 12mm bar stock. Fully marked. THICKNESS: 12MM PROOF TESTED: 16KN MATERIAL: ALUMINUM MINIMUM BREAKING STRENGTH: 25KN...

    $16.99
  • DMM HITCH CLIMBER PULLEY RED

    DMM HITCH CLIMBER RED PULLEY

    The Hitch Climber helps organize carabiners, reducing the probability of poor configurations such as cross loading. It doesn't matter if you are ascending or descending, carabiners tend to be kept in the correct alignment. A complete second climbing...

    $113.99
  • VSG FIGURE 8 DECENDER W/ EARS

    SHERRILLTREE FIGURE OF 8 DESCENDER WITH EARS STAINLESS STEEL

    This figure of 8 descender is one of the most commonly used friction devices in the tree care industry. When used properly, the figure eight descender will slow the rate of descent of an object, using varying degrees of tension allowing for a controlled...

    $89.99
  • NOTCH MICRO PULLEY CE

    NOTCH MICRO PULLEY CE

    Features free-swinging side plates and a large attachment hole. The streamlined shape and smooth riveted construction help to cut down on bulk in your climbing system.• 7,000 lbs Tensile, 700 lbs WLL• Material: Aluminum/Side Plate:...

    $40.99
  • CMI 5/8" STEEL RIGGING BLOCK

    CMI 5/8" STEEL ARBORIST RIGGING BLOCK

    Colorado Mountain Industries, a leader in the rock and rescue industry, has a big thing for stainless steel! We all know that stainless doesn't rust, but did you know that pound for pound, it's harder and stronger than regular steel? That strength of...

    $246.99
  • CMI 1/2" MINI ARBORIST BLOCK

    CMI RP162 - 1/2" MINI ARBORIST BLOCK

    Rope Capacity: 1/2inTensile Strength: 21,900 lbs. I would like to introduce CMI's newest mini arborist block, the RP162. Weighing in at only 1 pound, the RP162 delivers an impressive MBS of 21,900 lbs. It has a 1/2" rope capacity and is currently the...

    $213.99
  • 3" STEEL RING

    ISC STEEL RINGS 3"

    Quality Steel rings from ISC are proof loaded to more than 16 kN and are rated 70 kN. Fully Marked 

    $9.99
  • 1/2" BLOCK

    CMI MINI ARBORIST BLOCK

    CMI is introducing the newest mini arborist block, the RP162.  With it weighing in at only 1 pound, the RP162 delivers an impressive MBS of 21,900 lbs.  Has a 1/2" rope capacity and is currently the smallest and strongest block of its kind on...

    $213.99
  • 3/4" BLOCK

    CMI RP131 ARBORIST PULLEY BLOCK 3/4"

    CMI has designed their RP131 for use in a false crotch system to reduce wear on bull ropes. The upper bushing maximises the strength of the sling, while its side plates prevent damage to the rope. With the RP131’s upper bushing it will allow slings...

    $459.96
  • ALUMINUM RING 3"

    ISC 3" ALUMINUM RING

    These are quality aluminum rings from ISC that are proof loaded to more than 16kN and are rated to 25kN.They feature 12mm bar stock and are fully marked. You can choose between the smaller or larger ring.Size refers to the interior diameter of the...

    $14.05
  • ALLOY FIGURE 8 DESCENDER W/ EARS

    ALLOY FIGURE 8 DESCENDER WITH EARS

    CMI forges their eights out of aircraft-grade aluminum alloys, instead of the traditional steel. With this design choice it keeps their product light, produces excellent friction, and maintains the safety standards. Hot forging their product produces an...

    $75.00
  • MICROPULLEY W/ ALUM SHEAVE

    MICROPULLEY W/ALUMINUM SHEAVE

    This Pully featuring 1/2" rope capacities and 7075-T6 anodized aluminum side plates for unparalleled strength, these pulleys have a place in every climber or rescuer's pack. Rescue model.  Purple anodized aluminum sideplates, 1 1/4" aluminum sheave,...

    $64.99
  • STAINLESS STEEL 3" PULLY UP TO 5/8"

    CMI STAINLESS STEEL 3" PULLY UP TO 5/8"

    This CMI’s RP105 is a pulley with a 16,000 pound breaking strength. It has a 5/8" rope capability, and the large rigging point accepts the largest carabiners--two of them. With the extra wide, skirted side plates ensure that rope damage is kept to...

    $113.98
  • DMI 3/4" STAINLES STEEL ARBORIST BLOCK

    DMI 3/4" STAINLES STEEL ARBORIST BLOCK

    The large version of the best-selling stainless steel arborist block from CMI accommodates tree rigging ropes up to 3/4” in diameter and features increased strength. Note: With this style of block, care must be taken that the relatively sharp side...

    $325.95
  • CMI CALIFORNIA SWIVEL

    CMI CALIFORNIA SWIVEL

    This CMI's California Swivel is built to be the perfect swivel connector for your climbing harness's rope or webbing bridge. The shape of the receiver is textile-friendly, and provides just the right balance of friction and reduced wear on your bridge. 3...

    $139.95
  • Imp SRT Redirect Device

    IMP SRT REDIRECT DEVICE

    This IMP is a tool for redirects in SRT climbing. For use with 10mm - 12mm ropes, 25 kN MBS. See the videos below for more information on using this simple SRT device.

    $68.00
  • 3/4 Arborist Block CMI

    CMI 3/4" ALUMINUM ARBORIST BLOCK

    This is CMI's compact aluminum block is small and strong with a large capacity and robust design. Knurled knob for easy push and turn opening. Orange 7075 alloy sideplates, 3-inch aluminum sheave, bronze bushing and stainless steel axle. 51,000 lb MBS...

    $362.40
  • PULLEY, CMI 2 3/8" STAINLESS PULLEY

    CMI 2 3/8" PULLEY

    This is CMI's classic pulley. Stainless steel side plates & axle, 2 3/8” aluminum sheave, bearing. Available in a regular version or a “Cable-Able” versions which can be used on wire rope.WLL 850 lb. Breaking Strength 8,500 lb.

    $134.99
  • PULLEY DMM HITCH CLIMBER RED

    DMM HITCH CLIMBER PULLEY

    This is DMM's Hitch Climber and is the single most popular pulley for organizing a hitch system, thanks to the 3 holes which streamline the system, and open up additional tie-in options for advanced uses. Grab a Hitch Climber set and get the pulley, oval...

    $94.00
  • DESCENDER, STEEL RESCUE 8 W/ EARS

    STEEL BENT EAR FIGURE 8

    Uses include personal belay, rescue, and rigging. The steel figure eight has long bent ears to prevent the rope from locking up during descent. Popular for rescue kits or as an inexpensive lowering device. 11,250 lb (50 kN) break strength.

    $89.99
  • MICROPULLEY, CMI DOUBLE SHEAVE

    CMI DOUBLE SHEAVE MICRO SNATCH PULLEY

    This is CMI's double-sheaved version of the micro snatch pulley, this rescue model features the same Anodized side plates, 1 1/4” aluminum sheave, lower becket. 7,000 lb breaking strength, max capacity 1/2”, 3.5” tall x 1.75”...

    $74.85
  • MICROPULLEY, CMI MICRO SNATCH

    CMI MICRO PULLEY

    Micro pulley from CMI is one of the most popular items we have. A perfect slack-tending pulley for your friction hitch. Swinging side plates for midline installation, a stainless steel axle, and high strength make this a great all around pulley for your...

    $49.95
24 of 25 Items